CDF door escutcheon PZ key E1100

Euro-profile cylinder for a cylinder lock, in iron

This rose has a keyhole for a Euro-profile cylinder, the cylinder used in modern locks. It is designed for doors that lock with a key: an entrance door, an office door or any room you want to secure. It is forged from iron, the material used in Dauby’s CDF – Créations du Fer – collection. It is fitted as a pair, with one rose on each side of the door.

Included

• A pair of roses, left and right
• Two M4 through-bolts to secure the adaptors to the door
• Set of wood screws, available on special request
• Fitting instructions in French
• Material: iron
• 24-month manufacturer’s warranty

Compatibility

Designed for wooden doors of any type up to 44 mm thick. For thicker doors, tell us the thickness in your order comments and we’ll adapt the fitting kit. To understand the differences between rose types, see our article on handles mounted on a rose.

Dauby, a Belgian foundry

Dauby makes its handles to order in Belgium in two collections. Création du Fer, to which this model belongs, is made entirely of solid iron: each piece is cast in a sand mould and then finished by hand in one of three finishes: polished iron, black (aged iron) or waxed rust. Inspired by the latches of old farmhouses, these authentic designs suit characterful homes as well as more contemporary interiors where wood takes centre stage. PURE, the other collection, uses the same traditional techniques to create clean lines inspired by the Bauhaus, in white bronze, raw bronze, raw metal or aged iron.

Care

The iron finishes are lacquered or varnished. No coating is completely scratch-resistant: a ring, a sharp object or everyday use can leave marks, which give the piece its character. If the black lacquer is damaged, it can be touched up in RAL 9005. The waxed rust finish is deliberately rough and grainy: it should not be polished, but maintained with beeswax or petroleum jelly. Never use an abrasive cleaner.