R PURE PZ-50F Door Rosette
Door rosette for "i" key, also called "PZ" or "cylinder".
1 pair of door rosettes - right and left
∅ dimension: 5
"i" key door rosettes are designed for entrance doors, doors providing access to a garage or cellar. These rosettes can accommodate a serrated key. The profile allows the key to enter the cylinder, turn and lock the mechanism!
Secure payment
Tracked international delivery
Returns and exchanges within 90 days
French after-sales service
Round bronze rose for a Euro-profile cylinder lock
This rose has an opening for a Euro-profile cylinder, the cylinder used in modern locks. It is intended for doors that lock with a key: an entrance door, an office or a room you want to be able to lock. It is cast in bronze, the material used for Dauby’s Pure collection. The rose is round, 50 mm in diameter and 4 mm thick: the flat version in the range, which is the most discreet on the door. It is fitted as a pair, with one rose on each side of the door.
Included
- A pair of roses, left and right
- Two M4 through-bolts to secure the adaptors to the door
- Set of wood screws, available on special request
- Fitting instructions in French
- Material: solid bronze
- 24-month manufacturer's warranty
Compatibility
Suitable for wooden doors of any type up to 44 mm thick. For thicker doors, tell us the thickness in your order comments and we will adapt the fitting kit. To understand the difference between the types of roses, see our article on lever handles fitted on a rose.
Care
Dauby bronze is a living material: its colour deepens over time, while areas touched by hand polish themselves naturally. The manufacturer calls this a living finish and recommends letting it develop: no maintenance is needed. If you prefer to restore its original shine, a soft cloth and copper or silver polish, depending on the finish, are all you need. Never use an abrasive cleaner.
Customers also liked ( 16 other product in the same category )
